LOCTITE® FREKOTE 700-NC™ offers excellent release properties for the most demanding applications and is a great all-purpose release agent. LOCTITE® FREKOTE 700-NC™ releases epoxies, polyester resins, thermoplastics, rubber compounds and most other molded polymers
LOCTITE® FREKOTE 770-NC™ offers excellent release for various molding applications. LOCTITE® FREKOTE 770-NC™ can be used for the release of epoxies, polyester resins, vinyl ester resins, thermoplastics, adhesives, and rotationally molded plastics. This product is particulary well suited for tougher to release processes such as filament winding and non gel coated polyester and fiberglass molding.
LOCTITE EA 934NA AERO, epoxy paste adhesive, two-component LOCTITE® EA 934NA AERO is a two-component thixotropic paste adhesive, which cures at room temperature and possesses superior strength to 300°F/149°C and higher. Its thixotropic nature and good compressive strength make it ideal for potting, filling and fairing, as well as for shim applications. LOCTITE EA 934NA AERO is qualified to MMM-A-132 Type 1, Class 3 with a room temperature cure.
LOCTITE EA 934NA AERO, epoxy paste adhesive, two-component LOCTITE® EA 934NA AERO is a two-component thixotropic paste adhesive, which cures at room temperature and possesses superior strength to 300°F/149°C and higher. Its thixotropic nature and good compressive strength make it ideal for potting, filling and fairing, as well as for shim applications. LOCTITE EA 934NA AERO is qualified to MMM-A-132 Type 1, Class 3 with a room temperature cure.
LOCTITE EA 9306NA GAL AERO
LOCTITE® EA 9306NA AERO is a gray thixotropic, one component, heat curable epoxy adhesive possessing excellent adhesion @ -67°F to 250°F (-55°C to 121°C). It is ideally suited for bonding applications where low sag and low exotherm are critical such as in core fill or potting applications. LOCTITE EA 9306NA AERO contains no asbestos.
LOCTITE EA 9394C-2 QT AERO
LOCTITE EA 9394/C-2 AERO uses a non-aromatic amine curing agent that retains many of the excellent properties offered by aromatic amine cured systems, high temperature service with a long pot life.
LOCTITE EA 9497 A&B
LOCTITE EA 9497 is a grey, 2-part, medium viscosity, high performance epoxy adhesive offering high temperature resistance and thermal conductivity. LOCTITE® EA 9497 is a general-purpose high temperature resistant structural bonder with thermal conductivity. The grey, 2-part, medium viscosity epoxy reliably bonds metal sheets or electrical components where toughness and thermal conductivity is required. It can be used in high temperatures up to +200°C, provides large gap fill and high compression strength in harsh environments.
LOCTITE STYCAST EE 4215 / HD 3561
LOCTITE STYCAST EE 4215/HD 3561, Epoxy, Potting and Encapsulating LOCTITE® STYCAST EE 4215/HD 3561 is a filled system recommended for potting applications where rigid or flexible wire leads protrude directly from the encapsulation and where high impact strength is required. This system eliminates microscopic cracking on flexing of leads. It adheres extremely well to lead materials, such as vinyl or neoprene.
